Showing posts with label broan nutone parts. Show all posts
Showing posts with label broan nutone parts. Show all posts

Sunday, June 26, 2011

5 Keys to a Successful Home Renovation

hard hat 300x199 5 Keys to a Successful Home Renovation
Home renovation can be a stressful undertaking. It is wise to deliberate carefully about renovations. All disputes over the renovation plan must be settled before the work begins or you are just postponing an inevitable (and probably heated) argument. Everyone in the family should have a voice in this undertaking, as it truly is a family affair.
The following list could have had three, eight or even 20 entries, but if you stick with the basics and exercise self-control, the following five keys can help guide you to, and through, a successful home renovation.
1. Good relationships mean good business – A home renovation will be a lot less stressful if you have a solid, trusting relationship with your contractor. Trust doesn’t arise between people instantly, but there are ways to speed the process, such as “third-party trust,” meaning referrals. If you don’t already know and respect a builder in your area, ask the people you trust about the contractors that they trust. Get referrals, and interview the prospects to get at least somewhat of a “feel” for them. Get referrals, check credentials, trust your instincts – and call references. Nothing builds trust in a contractor like good, positive reports from previous customers.
2. Accurate budgets are crucial – You need to understand how to budget for the job, and what is really involved, financially, in your home renovation. The better understanding you have of your budget, and the more accurate the estimates you include, the less likely your job will exceed your expectations. Although your contractor can supply some good information here, you should maintain authority over the budget yourself and not give anyone – not your spouse, your family as a whole or the contractor – the “keys to your wallet.” Do your homework, and follow the budget.
3. Home renovation is messy – Prior to the start of actual construction, remove all valuables and breakables from the affected areas. Unless the garage is part of the plan, you might consider storing items there. If the whole house is involved, think about renting a storage unit. While this will cause some short-term dislocation and require some sweat from the family’s brows (or more paid help), renovations are inevitably messy and accidents will happen. Take whatever steps are necessary to ensure the safety of your valuables, fine furniture, Persian rugs and other possessions.
4. Stick to the payment plan – One easy way to ruin your relationship with your contractor, and slow down or terminate your renovation project, is to deviate from your payment plan. If you are developing a timetable for the contractor’s work, you should also prepare, and adhere to, a timetable for the payments. You should be proactive in this matter, and never allow communication to deteriorate to the point where the contractor has to ask for money. Plan out every detail and every dollar, and follow the plan.
5. Extras: There’s always something – When developing your renovation budget, leave some room for the unanticipated extras that inevitably come up in the course of a home renovation. In addition, once you start renovating, you may think of other improvements or changes you wish to make. This means building some flexibility into the financing, as well as the project plan and the timetable. Strike a balance between firmness and flexibility so that you don’t go off on a tangent and lose control of the cost or the schedule.
Like most big undertakings, a home renovation can be somewhat scary. Don’t hesitate to speak with friends, relatives, coworkers or neighbors who have been through the same thing. Investigate all concerns – listen carefully, take notes and don’t leave any question unanswered before finalizing your plan and your budget. Don’t be in a hurry, don’t make assumptions and, above all, do not waver in your determination to see the project through to a successful conclusion

Tuesday, June 21, 2011

OSHA Announces Three Month Phase-In for Residential Construction Fall Protection

The U.S. Department of Labor's Occupational Safety and Health Administration (OSHA) today announced a three month phase-in period to allow residential construction employers to come into compliance with the agency's new directive to provide residential construction workers with fall protection.

The three month phase-in period runs June 16 - September 15, 2011. During this time, if the employer is in full compliance with the old directive (STD 03-00-001), OSHA will not issue citations, but will instead issue a hazard alert letter informing the employer of the feasible methods they can use to comply with OSHA's fall protection standard or implement a written fall protection plan. If the employer's practices do not meet the requirements set in the old directive, OSHA will issue appropriate citations.

If an employer fails to implement the fall protection measures outlined in a hazard alert letter, and during a subsequent inspection of one of the employer's workplaces OSHA finds violations involving the same hazards, the Area Office shall issue appropriate citations.

The new directive, Compliance Guidance for Residential Construction (STD 03-11-002), a detailed description of the phase-in policy, a presentation and other guidance materials about requirements for protecting workers from falls are available at http://www.osha.gov/doc/residential_fall_protection.html.

A Safety and Health Topics Web page, which provides a list of references to help employers identify fall hazards and possible solutions for eliminating such hazards, is available at http://www.osha.gov/SLTC/fallprotection/construction.html





OSHA's On-Site Consultation Program offers free and confidential advice to small and medium-sized businesses in all states across the country, with priority given to high-hazard worksites. For more information, visit http://www.osha.gov/dcsp/smallbusiness/consult.html.

Under the Occupational Safety and Health Act of 1970, employers are responsible for providing safe and healthful workplaces for their employees. OSHA's role is to assure these conditions for America's working men and women by setting and enforcing standards, and providing training, education and assistance. For more information, visit http://www.osha.gov/.

Sunday, May 29, 2011

New Law Will Save Big Bucks for Small Businesses

A bill was sent to President Obama’s desk yesterday that repeals a small part of his own healthcare legislation. However, if it becomes law, it will make life a little easier for remodelers, contractors, and any other small business that uses its fair share of vendors.
By a vote of 87 to 12, the Senate approved the Small Business Paperwork Mandate Elimination Act of 2011 on April 5. The law repeals a burdensome tax paperwork requirement that was part of the Patient Protection and Affordable Care Act approved last year. This would have mandated that starting next year businesses would be required to file a 1099 for every vendor that provided more than $600 in services or goods throughout the course of a year.
The annual $600 limit was for all vendors so contractors would find themselves sending out a stack of 1099s not just for their subs and vendors but also for mundane purchases such as coffee, office supplies, and even fuel.
No doubt the requirement — had it become a law — would have meant that businesses would have to spend resources on accountants and bookkeepers to adhere to the rule rather than on expanding their operation in a more meaningful way.
Aside from eliminating the 1099 requirements, the new potential law also repeals a component in the Small Business Jobs Act of 2010 that stipulated that as of Jan. 1, 2011, landlords had to submit 1099s to vendors that supplied them with more than $600 of services.
Contractors, remodelers, and other small businesses can continue sending out 1099s as they have been in the past based on the IRS’s reporting procedures.
www.StoreForParts.com

Monday, April 18, 2011


What does CFM mean?
CFM is the acronym for Cubic Feet Per Minute - the measure of air volume moved by the fan blower. Choose a fan with a CFM rating appropriate for your room size to ensure adequate ventilation.
What is a Sone, and how is it measured?
A Sone is a measurement of sound in terms of comfortable hearing level for an average listener. The lower the sone value, the more comfortable the listening environment. Sones are not decibels or volume, but rather how sound is "sensed". One sone is the equivalent of a quiet refrigerator.
What is continuous ventilation?
Continuous ventilation provides today?s airtight homes with a relatively constant and controlled lower level of ventilation.
Can I mount fans above my tub and shower?
Most fans are rated for use over a shower or bathtub with a GFCI (Ground Fault Circuit Interrupter).

Can my ceiling fan be surrounded by insulation?
Yes. Bath fans are designed to provide adequate cooling for motors and lighting, as well as products with integral heaters.
Will fans work in wall-mount applications?
Some bath and utility fans may be wall mounted. See the spec matrix for specific models. Improper installation may affect fan life, safety and your warranty.
Will a ceiling fan or wall-mount utility fan serve as a range hood?
No. Range hoods are specifically designed to handle grease and high temperature environments. Ventilation provided by NuTone fans is only a supplement for odor and moisture removal in the kitchen.
What does "static pressure" mean?
Static pressure is the measurement of airflow resistance as it is pushed through ductwork which reduces the effectiveness of the fan. Learn more on the Home Ventilation Institute web site www.hvi.org.

How long should a bath fan run after a shower is used?
The Home Ventilation Institute recommends that a fan should be left on for 20 minutes more to clear humidity adequately and to ensure moisture and condensation in the fan body or ducting is minimized.
What should I do if I can't wait for moisture to clear, but I don't want a fan to run all day long.
Sensing fans that detect the humidity rise caused by a shower and turn on automatically, when moisture has cleared it turns off. Some wall controls also give you the option of humidity sensing, or timer control. Just set it and forget it.
What are the timer features?
Delay-off timers automatically shut your fan off after a specified time interval. It?s a nice feature in high traffic bathrooms where you may wish to let the fan run to clear moisture adequately. A timer counts down the minutes of fan operation selected by the user.
Where should the exhaust fan be located?
Exhaust fans should be located in or near the shower or tub, and in an enclosed water closet. Keep exhaust points opposite the supply air source to ensure that the fresh air is drawn through the room. Bathroom doors should not be sealed too tightly at the bottom in order to allow "makeup air" to enter the room when the door is closed.

Where is the exhaust outlet on the ventilation fan?
The exhaust outlet is the point where air is discharged through the body of the fan housing into the ductwork. During installation, orient your fan with the exhaust outlet pointing toward the exit vent on your roof or wall to minimize turns in ductwork that impede airflow.
Why do the windows and mirrors fog even when the fan is running?
If windows and mirrors are very cold, condensation can still form on these surfaces. And if your bathroom is sealed tightly, replacement air may not be entering the room fast enough to displace the moist air. Be sure to undercut your door sufficiently to draw fresh air into the room. Fan placement can also be a factor. Your fan should be located far from the replacement air source to ensure the moist air is drawn out first. Finally, too many twists and turns in the ducting will significantly reduce the ability of the blower to remove moist air. Make sure your ductwork is as short and straight as it can be, with gradual turns rather than tight corners where necessary.
Why is water dripping from the grille of the fan?
Dripping water is either condensation (usually due to cold ductwork or improper duct installation), or a problem with the seal on a wall or roof vent. Insulated ductwork can help solve condensation problems, and running the fan longer will ensure moisture is completely removed from the duct. Ductwork should slope down toward a wall vent to direct condensation out of the exterior vent opening rather than back into the fan housing.
Can I install a heater over the bathtub or in a shower?
No. Heaters are not UL Listed (Underwriter's Laboratory) for installation over a bathtub or in a shower.

Can I use an inline or multi-port fan in one large bathroom?
Yes, this works the best for large rooms because you can install the ports over the areas where the ventilation is needed the most (source control). The size of the multi-port would be determined by the size of the room.
Does a duct-free bath fan expel air?
No. A duct-free fan is not a ventilating device. It does not remove air from the room.
What type of exhaust fan is recommended for hot tub areas?
A high CFM rated device is normally recommended for this type of application.
Can I use a smaller diameter duct than what the fan is designed for?
This is not recommended. It will cause the fan to run harder, greatly reducing the CFM performance of the fan and create excess noise.

Can larger diameter ducting be used with my bath fan?
Yes, larger diameters will result in improved performance.
What type of duct is recommended, rigid or flexible?
It is recommended, where possible, to use rigid duct. It has less resistance to air flow and allows the fan to operate much more efficiently. If flexible duct is used, be sure the duct is as straight as possible.
Can I exhaust my fan into my attic instead of out the roof or wall?
Never exhaust air into spaces within walls, ceilings, attics, crawl spaces or garages. The humidity may damage the structure and insulation.
What type of exhaust fan is best for a sauna or hot tub area?
High CFM-rated devices are normally recommended for this type of application.

Can I use a fan in a steam shower?
No. Since these are normally sealed chambers, a vacuum will be created.
Can I vent more than one bath fan out of a roof or wall cap?
No. Always follow the manufacturer's recommended ventilation requirements.

Thursday, April 14, 2011

Upgrade Kits

Broan Bath Fan Upgrade Kit

Broan Bath Fan Upgrade Kit
 
Do you have an old, ugly, noisy, worn-out Broan or Nutone bath fan?  Now it's easy to replace the old bath fan with Broan's Model #690 Bath Fan Upgrade Kit.  The upgrade kit will move more air and is quieter than the old model too.
Features
  • No re-wiring
  • No new duct work
  • No hassels
  • New motor (60 CFM and 3.0 Sones) reduces sound up to 50%, improves air movement up to 20%, and helps control humidity that causes mold and mildew
  • New grille - Upgrade your bathroom's look with a modern white grille (can be painted)
  • No special tools are required - kit includes everything you need
  • Two motor plates included to fit most economy fans

Broan 690 Upgrade Kit replaces the models below:
If your grille looks like this:
 
The fan is very likely one of these models:
 
Housing Dimensions:
Broan
670, 671, 688, 689

Nautilus
N671, N688

7-1/2"x7-1/4" only
* 8" x 8-1/4" are not compatible

NuTone
693, 695, 696N
7-1/2"x7-1/4"
or
8"x7-1/4"

Broan 690 Upgrade Kit replaces the models below:
If your grille looks like this:
 
The fan is very likely one of these models:
 
Housing Dimensions:
Broan
670, 671, 688, 689

Nautilus
N671, N688

7-1/2"x7-1/4" only
* 8" x 8-1/4" are not compatible

NuTone
693, 695, 696N
7-1/2"x7-1/4"
or
8"x7-1/4"
More Information:

  • Model: 690
  • Manufactured by: Broan